YFBX3-315M is the 315M frame size (shaft height H = 315 mm) of the Shangli YFBX3 Series High-Efficiency Dust Ignition-Proof Three-Phase Induction Motors. It covers 55–132 kW in 2 / 4 / 6 / 8 / 10-pole versions with Ex marking DIP A / DIP B, T1–T4, and IP65 enclosure, for plants with combustible dust atmospheres; efficiency to China GB 18613-2012 efficiency grade 2. The tables below list performance data and mounting dimensions for all 5 standard models on this frame.
- Series
- YFBX3 Series High-Efficiency Dust Ignition-Proof Three-Phase Induction Motors
- Frame size / shaft height
- 315M / H = 315 mm
- Output range
- 55–132 kW
- Poles
- 2 / 4 / 6 / 8 / 10
- Ex marking
- DIP A / DIP B, T1–T4
- Explosion protection standard
- GB 12476.1 (electrical apparatus for combustible dust, protection by enclosure and surface temperature limitation)
- Enclosure
- IP65
- Cooling
- IC411
- Efficiency
- China GB 18613-2012 efficiency grade 2
- Area of use
- Plants with combustible dust atmospheres
Performance data
| Model | Output kW | Output HP | Poles | Speed r/min | Current A (380 V) | Torque N·m | Efficiency % | Power factor cosφ | Locked-rotor torque / rated torque | Locked-rotor current / rated current | Breakdown torque / rated torque | Noise LwA dB(A) | Vibration class | Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YFBX3-315M-2 | 132 | 177 | 2 | 2980 | 236.2 | 423 | 95.4 | 0.89 | 1.9 | 7.1 | 2.3 | 96 | 2.3 | 1182 |
| YFBX3-315M-4 | 132 | 177 | 4 | 1490 | 238.4 | 846 | 95.6 | 0.88 | 2.0 | 7.1 | 2.2 | 93 | 2.3 | 1150 |
| YFBX3-315M-6 | 90 | 120.7 | 6 | 995 | 171.5 | 863.8 | 94.9 | 0.84 | 2.0 | 6.7 | 2.0 | 85 | 2.3 | 1170 |
| YFBX3-315M-8 | 75 | 100.6 | 8 | 740 | 150.5 | 967.9 | 93.5 | 0.81 | 1.8 | 6.4 | 2.0 | 82 | 2.3 | 1080 |
| YFBX3-315M-10 | 55 | 73.8 | 10 | 592 | 121.1 | 887.2 | 91.8 | 0.75 | 1.3 | 6.2 | 2.0 | 82 | 2.3 | 1080 |
Values at 380 V, 50 Hz, duty S1. Rated torque is calculated as T = 9550 × P / n. Outputs in brackets are non-preferred ratings. Weights are theoretical estimates for reference. Final values are those in the routine test report.
Mounting dimensions (mm)
| Applies to | A | B | C | H | K | D | E | F | G |
|---|---|---|---|---|---|---|---|---|---|
| 2-pole | 508 | 457 | 216 | 315 | 28 | 65 | 140 | 18 | 58 |
| 4-pole and above | 508 | 457 | 216 | 315 | 28 | 80 | 170 | 22 | 71 |
| Flange | M | N | P | R | α | Holes × dia. | T |
|---|---|---|---|---|---|---|---|
| FF600 | 600 | 550 | 660 | 0 | 22.5° | 8×Φ24 | 6.0 |
Outputs, mounting arrangements and mounting dimensions are the same as the YB3 series; feet, shaft extension and flange match YBX3 and YBX4 flameproof motors of the same frame size. The terminal box differs from the flameproof version, so overall dimensions are confirmed on the approval drawing.
Outline drawing
Selection notes
- DIP A is the dust-protected type and DIP B the dust-tight type, in temperature classes T1–T4. Choose according to the type of dust, zone classification and minimum ignition temperature at site, and state these in your enquiry.
- For plants with combustible dust such as flour, feed, sugar, grain processing, pharmaceuticals, plastic powder, coal powder and metal powder. For underground coal mines choose a flameproof motor.
- Enclosure IP65, cooling IC411. Where explosive gas and dust are both present, choose a flameproof and dust ignition-proof version and state this in your enquiry.
- Outputs in brackets are non-preferred ratings. For higher efficiency choose YFBX4 on the same frame.
Frequently asked questions
What is the difference between the YFBX3-315M and a flameproof motor?
A dust ignition-proof motor keeps dust out of the enclosure and limits surface temperature, for combustible dust areas. A flameproof motor has an enclosure that withstands an internal explosion, for explosive gas areas. Both have the same outputs and mounting dimensions; the terminal box design differs.
What is the Ex marking of the
DIP A / DIP B, T1–T4, IP65. Choose according to the type of dust and zone classification at site.
How can I get CAD drawings and the Ex certificate for the
Complete the selection form at the bottom of this page with the model, type of dust, zone, mounting arrangement and file format required (DWG, STEP or PDF). Our sales team will send the drawings, certificate documents and a quotation.